Showtec phantom 25 led spot manual

Control Mode Keep this device away from rain and moisture! Unplug mains lead before opening the housing! Be careful with your operations. Page 5: Operating Determinations If your Showtec device fails to work properly, discontinue use immediately.

Pack the unit securely preferably in the original packing material , and return it to your Showtec dealer for service.

Page 6: Rigging Rigging Please follow the European and national guidelines concerning rigging, trussing and all other safety issues. Do not attempt the installation yourself! Always let the installation be carried out by an authorized dealer! Procedure: If the projector is lowered from the ceiling or high joists, professional trussing systems have to be used. Page 7: Description Description of the device Features The Showtec Phantom is a moving-head with high output and great effects.

Page 8: Backside Backside Fig. Use only the appropriate lamp for your unit. Note that, product versions that use other lamps, may be offered in the future. Check your product specification label for information. Before plugging the unit in, always make sure that the power supply matches the product specification voltage.

Do not attempt to operate a V specification product on V power, or vice versa. One Phantom 1. Gradual head adjustment from one end of the slider to the other , center. Page Control Panel Channel 13 — Prism No rotation Backwards rotation from fast to slow Prism Channel 14 — Focus From close distance to far distance The Phantom can be operated with a controller in control mode or without the controller in stand-alone mode.

Page Remotely Controllable Functions Controlling: After having addressed all Phantom fixtures, you may now start operating these via your lighting controller.

Note: After switching on, the Phantom will automatically detect whether DMX data is received or not. Allow the fixture to cool for at least 5 minutes before handling. Avoid brute force when installing or operating the device.

Only handle the power cord holding it by the plug. Never pull out the plug by tugging the power cord.

Check the device and the power cord from time to time. Have a qualified engineer inspect for safety before operating. The arising condensation water might damage your device.

Leave the device switched off until it has reached room temperature. Pack the unit securely preferably in the original packing material , and return it to your Showtec dealer for service. Moving head must be installed beyond the reach of children. Never leave the unit running unattended.

The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device. Consistent operation breaks will ensure that the device will serve you for a long time without defects. Please follow the European and national guidelines concerning rigging, trussing and all other safety issues.

The Phantom can be placed on a flat stage floor or mounted to any kind of truss with quick locks and a clamp. Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.

Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.

Call Highlite or mail aftersales highlite. Be prepared to provide the model number, serial number and a brief description of the cause for the return. Highlite reserves the right to use its own discretion to repair or replace product s.

As a suggestion, proper UPS packing or double-boxing is always a safe method to use. Note: If you are given an RMA number, please include the following information on a piece of paper inside the box:. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be reported to the carrier upon receipt of merchandise. It is the customer's responsibility to report and submit claims with the shipper in the event that a fixture is damaged due to shipping.

Transportation damage has to be reported to us within one day after receipt of the delivery. Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless agreed otherwise in writing. Complaints against us must be prepared in writing or sent by fax within 10 working days after receipt of the invoice. After this period complaints will not be handled anymore.

Complaints will only then be considered if the client has so far complied with all parts of the agreement, regardless of the agreement from which the obligation is resulting. Gobo size: Glass gobo: 23,75 mm gobo size ; 21 mm image diameter ; 1,31 mm gobo thickness. Remove all packing materials from the Phantom Spot. Check if all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly.

Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. Check that the unit is plugged int o an appropriat e power supply. The LEDs. Return th e Phantom t o your Showtec dealer. The fuse.

Replace t he fuse. See page 2 1 for replacing t he fuse. If all of the above appears to be O. If you are unable t o determine the cause of the p roblem, do not open t he Pha ntom , as this may. Return the device t o your Showtec dealer. Check the DM X setting. Make sure that D MX addresses are correct. Try your DMX control aga in. Determine w hether the controller or light effect is at fault.

Does the controller operat e properly with. If not, take the cont roller in for repair. If so, take th e DMX cable and the light. See next page for m ore problem solving. Need help?