Toshiba 451c topaccess manual

Watermarks consist of text. Image Overlays can be any combination of text, graphics or other document elements. Printing watermarks consumes fewer resources than using Image Overlays, so you should use watermarks wherever possible, particularly when printing speed is an issue.

This includes the setup files to install the USB driver on the Windows 98 for each language version. This includes the compressed zip files that contain the setup files to install each printer driver for each language version. This includes the Tar file for Red Hat 6. This section provides instructions for configuring the printing systems on Windows computers.

Printer drivers are software components that enable application programs to interact with the printer. These printer drivers offer document print, layout and assembly functions that are not available with many applications. This utility allows you to monitor all jobs and control your own current jobs.

With the notification feature enabled, TopAccessDocMon informs you of copier or printing events, such as paper-out or drawer open, before you walk to the copier to find your job incomplete or unsuccessful. This utility allows you to install and manage the TrueType fonts that are corresponding to the internal PS fonts on the equipment. Because TopAccess is an embedded web-based device and job management tool it does not require your installation. This section will help you to plan an installation suited to your environment.

Before installing the client software, read this section. Before installing the client software, confirm the followings to perform an appropriate installation. TopAccessDocMon can be used to monitor both devices. When you uninstall the TopAccessDocMon, please click [No] at the dialog box that displays the message to delete the settings for the TopAccessDocMon so that you can restore the settings after installing new one. To install the printer drivers and other client software on a Windows workstation, the following is required.

Please find the installation procedure suited to your environment from the following: P. When this equipment is connected to your computer with a printer cable, you can install the printer drivers from the Client Utilities CD-ROM and set up the printer connection with LPT1 port.

This equipment supports the USB 2. When this equipment is connected to your computer with the USB cable, you must install the printer drivers using the Windows Plug and Play functions. Some of them are applicable to your environments, the printing methods generally recommended are decided by the Windows version. If you have no advance for an installation from your administrator, check these printing methods whether they are suited to your network environments.

If you can use the Windows NT 4. For further information about setting up printing via a Windows print server, see the Network Administration Guide. For more information about FTP printing, please refer to following section. If you use Windows NT 4.

This equipment can be used with an SMB printer connection that allows you to connect to this equipment using File and Printer Sharing for Microsoft Networks service. SMB printing is the common method used to set up the printer. However, SMB printing is not suitable for printing a large amount of documents. This allows you to print to this equipment from anywhere on the Internet. For more information about Email printing, please refer to following section.

Windows XP. When this equipment is configured to manage printing with NetWare 4. In this case, install the printer driver and set up the SMB printer connection to a print queue created in the NetWare server. Installing Client Software. When this equipment is configured to manage iPrint with NetWare 6. In this case, install the printer driver using iPrint Client from the NetWare server. This section describes how to install the client software when this equipment is connected with a printer cable.

You can install printer drivers and other client software using the installer. If you want to install printer drivers as well as other client software, this method is convenient.

While you can install a printer driver using this method, other client software cannot be installed. When you want to install different printer drivers after installing a printer driver using Plug and Play, or when you want to install the printer drivers without using the installer or Plug and Play, install the printer drivers using the Add Printer Wizard. The following describes an installation on Windows The procedure is the same when other versions of Windows used.

Select your language and click [OK]. In the dialog box that appears, select the folder and click [OK]. Check the software that you want to install and click [Next].

Do not check this item. Continue to next step. Skip to Step Click [Yes] to continue the installation. If the following message appears, click [Yes] to set the indicated printer driver to be the default printer driver, or click [No] to not change the default printer driver.

NOTE: Before using the printer driver for printing, please configure the installed options of the equipment and department code if required on the printer driver. The procedure to install the printer driver for Parallel printing by Plug and Play differs depending on the version of the Windows being used.

However, when this equipment and your computer are connected to the local area network as well as this equipment is connected to the parallel port of your computer, you can use TopAccessDocMon to monitor your print jobs.

The procedure is the same when Windows Me is used. Connect the printer cable to this equipment and your computer, and then power on the equipment and your computer. Select "Search for the best driver for your device. Recommended " and click [Next]. Click [Cancel] to exit the installer and continue the operation. Select "Yes" to print a test page and click [Finish]. Select "Search for a suitable driver for my device recommended " and click [Next].

Locate the directory where the printer driver for Windows is located, select a INF file, and click [Open]. Select "Install from a list or specific location Advanced " and click [Next]. Then click [Browse]. The procedure to install the printer driver for Parallel printing by Add Printer Wizard differs depending on the version of the Windows being used.

Click [Start], select [Settings], and click [Printers] to open the Printers folder. Select the printer driver and click [Next]. Change the name if desired and click [Next]. The installation is completed. Locate the directory where the printer driver for Windows NT 4. Select whether this printer is shared or not, and click [Next].

If you select any operating systems, repeat the procedure from Step 5 to 11 to install the printer drivers for selected operating systems. Double-click the [Add Printer] icon. Then click [Next]. Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password.

Term This license is effective until terminated by TTEC or upon your failure to comply with any term of this Agreement. General You may not sublicense, lease, rent, assign or transfer this license or the Software. Printing Guide — Preface 5. All Rights Reserved. End User Product Guides. Home Support Guides Follow Us. Further Info. Together Information.

View the manual for the Toshiba e-studio c here, for free. This manual comes under the category Printers and has been rated by 1 people with an average of a 9. This manual is available in the following languages: English. Below, you will find customer questions and answers about the Toshiba e-studio c. Is your question not listed? Home Printers Toshiba e-studio c Toshiba e-studio c manual.

Ask a question. About the Toshiba e-studio c. Once users store the scanned images as e-Filing documents, the documents can be managed by creating boxes and folders. Users can work with e-Filing documents such as printing them, merging them to create a new document, and so on, using the e-Filing web utility.

Users can use saved files by copying them from the folder where users save the scanned images. Scan to E-mail mode allows users to send scanned images to specified e-mail addresses. Users can scan originals not only by selecting one of the scan modes, but also by combining two scan modes at a single operation.

The following procedures describe about the basic instructions on how to perform the scan operations. For more information about a template, see the following section. Press the [SCAN] button on the control panel to enter the scan menu. Select a button of the desired scan mode.

When you store the scanned images to e-Filing, you can manage them using the e-Filing web utility. Set the scanning conditions using the buttons on the touch panel and digital keys, and press the [ENTER] button to save the settings. The setting options vary depending on the scan mode that you selected. For instructions on how to set them, see the instructions for each scan mode.

And press Scan! Select the other button of the desired scan mode. NOTE: You can set two scan modes at a single operation. You cannot set all three scan modes at a same time. The screen returns to the basic scan menu and the button will be unselected not grayed out. The jobs for pages 1, jobs are available to display. Press the [Next] button to display the 5th job or later, and press the [Prev] button to display the previous page. To: Display the name of the file created or the e-mail address of the recipient.

Agent: Display the function used for the scan job. Date, Time: Display the date and time of the scan job. Pages: Display the number of pages scanned or sent via E-mail.

Status: Display the status of jobs. When this button is pressed, the job is deleted. Then press the [SCAN] button. When pressing the [SCAN] button on the log menu, the scanning status of the following items is displayed.

To: Display the storing location of the scanned data or E-mail address of the recipient. Date, Time: Display the date and time at the time of scanning. Pages: Display the number of pages scanned or sent E-mail. This section describes the instructions on how to perform Scan to e-Filing and how to use the stored data in e-Filing. In this function, the scanned original data can be stored in the e-Filing.

You can scan up to pages per 1 job. After storing the original data, you can print it at any time from the touch panel. Also you can manage stored documents using the e-Filing web utility. Using the e-Filing web utility, you can manage stored documents by creating user boxes and folders, printing documents, and merging several documents to create a new document.

To store the original data, you can specify the public box or one of user boxes. The public box is a pre-set box since the installation of the equipment, and it will be used to store documents that any user may need to work with.

The user box is the one created by the user, and, if password is set, you need to enter the password correctly. Before storing the original data in e-Filing, you need to set up the user boxes using the touch panel or e-Filing web utility. For setting up the user boxes and printing the stored documents from the touch panel or e-Filing web utility, see e-Filing Guide.

The instruction on how to set up the user boxes using the touch panel also describes in. NOTE: It is recommended to back up the data on the equipment's hard disk to prevent loss of data.